Home » Electrical Wiring Directory » Casablanca, Ceiling Fans
FAQs » Related » Resources » Reply » Ask a Question
« Rewiring Installing a Ceiling Fan Help For Wiring Your Ceiling Fan »


Casablanca Ceiling Fan Wiring

How to Wire a Casablanca Ceiling Fan and Remote Control – The wiring connections for a Casablanca Ceiling Fan are very straight forward because these ceiling fans use their own proprietary remote control system and all of the switching is done at the remote control module which is internal at the ceiling fan, there is no need to install a separate module.


Casablanca Ceiling Fan and Remote Control Wiring

  Electrical Question: I’m trying to figure out the wiring in a new Casablanca Vermont Fan model # C34G546M. Can split the fan from light control. Mounting the fan at top of 2 story stairwell, fine for remote to control the fan (and light) upstairs, but want the light switch at bottom of stairs to control light, so want to bypass the remote for the light.

Casablanca before ordering (I called) said no problem, upon receiving support said “you can’t, will void warranty” and I said they said you can and am sure people do all the time – please tell us color of the wire, referred us to customer support center admitting you can, but “they don’t want you to” but Florida center is just a recording (nearest center apparently)…can you help?

This electrical wiring question came from: Mark, a Handyman from Atlanta, GA

Dave’s Reply:
Thanks for your electrical wiring question Mark.

How to Wire a Casablanca Ceiling Fan and Remote Control

Skill Level: Beginner to Intermediate.
Tools Required: Basic Electricians Pouch Hand Tools, a non-aluminum ladder and Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools and access to the ceiling fan.
Precaution: Identify the ceiling fan circuit, turn it OFF and  Tag it with a Note before working with the wiring.

Mark, I have installed literally hundreds of ceiling fans and the Casablanca Ceiling Fan is one of the best ceiling fans your customer could ever purchase. The wiring connections for a Casablanca Ceiling Fan are very straight forward because these ceiling fans use their own proprietary remote control system and all of the switching is done at the remote control module which is internal at the ceiling fan, there is no need to install a separate module. The wiring connections are basic color to color and all the switching is done through the hand held remote control or the Casablanca remote wall switch. It just doesn’t get any simpler, these fans are rock solid and I have never had a Casablanca ceiling fan wobble, they are simply First Class and one of the Best.

The Following  will assist you to Install a Ceiling Fan:

Ceiling Fan Wiring
Ceiling Fan Wiring
How to Install Ceiling Fans and Wiring

Take the mystery out of ceiling fan wiring. Ceiling Fans are a great way to lower your energy bill and brighten up one of your favorite rooms.
Light Switch Wiring

Wiring Diagrams


« Method to Convert 220 volt to 120 volt Locating and Installing Pot Lights »


Learn How to Wire it Right with my
Complete Guide to Home Electrical Wiring
Perfect for Homeowners, Students,
Handyman, Handywomen, and Electricians
Includes:
Wiring GFCI Outlets
Wiring Home Electrical Circuits
120 Volt and 240 Volt Outlet Circuits
Wiring 3-Wire and 4-Wire Electric Range
Wiring 3-Wire and 4-Wire Dryer Cord and Dryer Outlet
Troubleshooting and Repair Electrical Wiring
Wiring Methods for Upgrading Electrical Wiring
Electrical Codes for Home Electrical Wiring
....and much more.

» Click here to learn more about Home Electrical Wiring «
  repair electrical wiring  


Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all projects.


Enter a Question or Topic and this Search will Locate Answers for You



FAQs Frequently Asked Questions and Comments

2 Responses to “Casablanca Ceiling Fan Wiring”
  1. jim says:

    I have a Casablanca Ceiling fan. I took everything apart to get to the flywheel where I replaced the set screw into the rubber disk that holds the fan blades on. It has a small circuit board in it with wires that go into these plastic wire holders. I made a drawing where all the wires go and thought I got all the wires right but the fan comes on when you turn the power on, but it shouldn’t because it has separate switch on the wall. The lights do work either. I cannot find the book or model number.

    • Dave Rongey says:

      Hi Jim,
      It sounds like the control board may have been damaged and needs to be replaced. The model number of the Casablanca Ceiling Fan should be on a label that is attached to the top portion of the motor housing or the base where the light fixture is attached. Another option may be to find a local electronic repair shop that may be able to fix the cracked circuit board and broken solder circuits, but that is a tedious task. See if the circuit board has a number on it that you can use to search for a replacement part.
      I hope this helps you.
      Dave

2 Comments Click here to Ask a Detailed Home Electrical Question and get an Instant Reply.

To Our Valued Visitors:
If you are asking a Quick Question please make sure it is about The SAME TOPIC:
Casablanca Ceiling Fan Wiring


Comments Posted here are Open for Quality Discussion and Participation.

PLEASE NOTE: WE DO NOT PUBLISH 3RD PARTY SPAM COMMENTS, TRACK-BACKS OR LINKS.



*