Articles about fixture

How do I put a new light fitting in a bedroom. Fully explained pictures and wiring diagrams about wiring light switches describing the most common switches starting with photo diagram 1…

Why Dusk To Dawn Light Fixtures and CFL Lamps Will Not Work

I would like to install one 3-way 600 watt dimmer and one 3-way switch. The fixture installation instructions specified that dimmer switches were not to be used with the fixture…

How to Check Noisy Light Fixtures – Fixture noises are not common, look for these problems – The noise may be cause by expansion and contraction of the fixture parts due to heat being produced while the fixture is on.

Common 120 volt and 240 volt house wiring circuits and the circuit breakers

Considerations When Replacing Bayonet Pin Bulbs: I tried to change the lampshade on the ceiling light, the original bulb was a Phillips bayonet style energy efficient bulb (NB 2 pin bayonet fitting), It did not fit into the socket easily.

How to Solve Static Electricity Noise

How do you connect 3 light fixtures to 1 switch?

The previous lights I took down must have been to heavy for the circular box in the ceiling and now the plaster has broken away and the box is low on one side…

I am trying to use a 100watt metal halide bulb in a normal lamp fixture, and am wondering if there is any way to do this with the correct modifications…

I have a dusk to dawn light that takes 175 watt Mercury Vapor bulb.

I am replacing a two bulb light fixture with a ceiling fan and light. I am having trouble with the wires from the fan to the junction box, as it seems there are more wires from the ceiling.

I am trying to wire a single pole switch and a 3 way switch into 1 switch Box. I believe the power comes in from the single light into…

For a type B 60 Watt bulbs, can I use a type A bulb instead?

First you must identify the electrical wiring configuration that presently exists. Then you can determine which additional wiring will be necessary to provide the desired results. Care must be taken to…

I would select the one that is closest to the door, whatever that color ends up being. Just be sure to…

There are a few options for 4-way switching, one of which is very affordable and is very reliable….

In order to answer this question you must first identify the configuration of your existing wiring configuration including….

The wiring coming out of the wall looks like two black insulated wires and no copper or bare wires. No third wire at all…

I tried pretty much every combination possible to hook up a 2-light ceiling fixture in the hallway, and none are working. I found out that now the bathroom light right off that hallway is no longer working too…